Mechanical companies directly recommend the production of aluminum foils on the same production line of the protection of the protection of the price, the price and the production of the furniture. Aluminium foil 1235 has a good text and a good setting rate, but the Zugfestigkeit is very good. It is important to increase the requirements of the materials or the high-winding requirements of the high-winding. 8079 Aluminium foil has a firm protection and a long-standing protection at the gleicher Dicke, and the dehnungsling is a good condition. This is not the case, the foils are in the wicker and the equipment of the verbundstoffs have ultra-dünnen Specifications for the brechen, and the product is higher. In the case of 8079 foils, 1235, it is not very important to be, so that the mechanical version of 8079 of the materials in the two specific materials are to be burned. If the packaging requirements of the packaging must be returned, if the mechanical subdivision of the 8079 and 1235 foils of the main factor, the packaging must be used to be used for the packaging, which must be used for the packaging.
The Dicken's interval is a more interesting offensive Underschied in the same aluminum foil. The Aluminium foil 1235 has a great look of a normal lieferdick. This can only not be used in the aluminum foil, but also in the very high-in-coated ultra-infoils. This is a good time for the packaging with a relational tolerance locker. Aluminium foil 8079 is concentered on ultra-dun specifications. The main leveling of the market is from 5 μm to 12 μm of contact. Under the bedingungen, the extrem of the dunner Dicke, can not be the number of the points of the points, where the main content of the legion of 8079 is. If the packaging industry needs a light design for a vacuum, the Aluminium foil 8079 can keep the barriers and reduce the material packaging, while the aluminum foil 1235 can be able to make the ultra-dultra-dumed Dick, which will be used to reduce the lochfehlern's risiko, so that the dick has two of its clarity of the Rand.
Flexibility is an indicator that cannot be ignored in the Soft-Packing-Pross. Aluminium foil 1235 has a high level of power, it is high and smooth and feed in the middle. It's not easy, it's hard and it's clear that Risse will come. This is an eignet for an e-in-packing package with high-speed running gears. 8079 Aluminium foil has the most flexible flexible on the bottom. In the vergleich of the 1235 Aluminium foil, there is a strong Fähigkeit, the key of the overheads under the multiple Reibung- and Faltarbeitsingungen to be wider. A lot of self-tradeding packaging and small packaging with a beautiful form should be formed and made. Aluminium foil 8079 can the formation of the substrates be removed and the Barrier effect was not covered by the kleine Löcher, which was observed during the run. This is a flexible and structural stability and flexible for the complex of forms of packaging products.
.jpg)
In the case of packaging, two aluminum foils are made of their own quality point of high packaging. Aluminium foil 1235 is high in the herkömmlichen Verbund-Snackbeuteln and normally täglichen Weichverpackungen. It is a cost-quide with hercommlical safety and schattierungen. The oberfläche is sober, and the preparation and compounding are not suitable. 8079 Aluminium foils are well in high-ended areas, aluminum-film foils and other high-blocking high-end packaging sansansings. This product is used by Aluminiumfoil, which is a durable product and it has been used for the high quality of the quality of the oil, the salt and the maintenance of the water. The packaging for the packaging of the freeze product is made of 1235-Aluminium folia, which should be used to be used in the same way, including the pharmaeutic packaging and high-temperature packaging for the high-temperature of the 8079-aluminium film, which is used to protect the material, which must be used to protect the material.
It is not possible to combine the product with the product's products. If the project budget is not, no part of the packaging is in the packaging, and only the most important safety and the barrier barrier is not possible, the Aluminium foil of 1235 is a real and stable Lösung. If the product is necessary to reduce the temperature at the high temperature, the inner material of the Ecke or the ultra-dun aluminum foil should be reduced, and it is a strong standard for the necessary to reduce the following standards for the temperature of the following, the 8079 aluminum foil should be used. An in-one reference price cannot be used in the selection of Aluminium foil 1235 or 8079 for flexible packaging, and the packaging of the production and the production and the production facilities of the end product must be updated. The collection of 8079 foils in the same period from 1235 is in the Wesentlichen a gleichgewicht between the costen and productivity. The most important packaging will make them of the following in the form of the line, and the high-ending Barrier-end packaging will be used for the quality of the stability of the materials. In combination with two aspects of the Barrier Index, the technology of the work and the budget supply, you can find the aluminum foil packaging, which is the most important packaging for your own.
